Who can drive a pilot vehicle
- The operator of a pilot vehicle must be an enforcement officer, or have completed a Class 1 or Class 2 pilot driver’s course approved by the Director.
Where this comes from: Rule 6.39
Class 2 and Class 1
- Class 2 is the entry level pilot qualification. Class 1 is the advanced qualification.
- You need a Class 1 pilot for Category 3 and 4, Category 2 at night (unless an inspector has verified the vehicle’s swept path, 6.34(4)), a load over 5 m wide, and the opposing lane on a median-divided road or at a controlled intersection.
Where this comes from: Rule 6.34, 6.35, 6.37, 6.46(4)
The pilot vehicle
- A Class 1 pilot vehicle is substantially white, with a gross vehicle mass not over 3,500 kg, and shows an approved pilot logo.
- A pilot vehicle may not carry or tow an overdimension load.
- All pilot vehicles and overdimension vehicles in a convoy must be in radio communication.
Where this comes from: Rule 6.41(3), (5) and (6), 6.44(3)
Courses and tests
- Load pilot driver code (NZTA). Class 1 and Class 2 pilot guide and forms.
- Class 2 pilot test (ASPEQ). Book the Class 2 load pilot test.
For pilot numbers by category, see Pilot vehicles for oversize loads NZ.
General information only. Not legal advice and not a permit. The Rule, your permit conditions, NZTA and road signs come first. Rules change, so check the current Rule before every move. Checked 9 Oct 2026 against the Land Transport Rule: Vehicle Dimensions and Mass 2016, as at 6 Aug 2026. If you are unsure, ring NZTA’s permitting team on 0800 683 774.
More guides
- Oversize load rules in NZ
- Pilot vehicles for oversize loads NZ
- Overdimension permits in NZ
- Oversize load lights, beacons and signs NZ
- Wide load rules NZ: over 3.1 m wide
- Oversize loads and level crossings NZ
- Tall loads, bridge heights and wires NZ
- When oversize loads can travel in NZ
- Christmas and holiday closures NZ
- Motorways, Harbour Bridge and tunnels NZ
- Over 5 m wide loads NZ