FREECheck your oversize load in under a minute. Open the Hub →

How to become a load pilot in NZ

Class 2 is the entry level. Class 1 is the advanced qualification.

Who can drive a pilot vehicle

  • The operator of a pilot vehicle must be an enforcement officer, or have completed a Class 1 or Class 2 pilot driver’s course approved by the Director.

Where this comes from: Rule 6.39

Class 2 and Class 1

  • Class 2 is the entry level pilot qualification. Class 1 is the advanced qualification.
  • You need a Class 1 pilot for Category 3 and 4, Category 2 at night (unless an inspector has verified the vehicle’s swept path, 6.34(4)), a load over 5 m wide, and the opposing lane on a median-divided road or at a controlled intersection.

Where this comes from: Rule 6.34, 6.35, 6.37, 6.46(4)

The pilot vehicle

  • A Class 1 pilot vehicle is substantially white, with a gross vehicle mass not over 3,500 kg, and shows an approved pilot logo.
  • A pilot vehicle may not carry or tow an overdimension load.
  • All pilot vehicles and overdimension vehicles in a convoy must be in radio communication.

Where this comes from: Rule 6.41(3), (5) and (6), 6.44(3)

Courses and tests

For pilot numbers by category, see Pilot vehicles for oversize loads NZ.

General information only. Not legal advice and not a permit. The Rule, your permit conditions, NZTA and road signs come first. Rules change, so check the current Rule before every move. Checked 9 Oct 2026 against the Land Transport Rule: Vehicle Dimensions and Mass 2016, as at 6 Aug 2026. If you are unsure, ring NZTA’s permitting team on 0800 683 774.

More guides

Try the free load check Get the HAULR app